wig
Enable an agent to recognise a wig, assess its suitability and condition, and determine appropriate fitting, styling, care and reuse actions.
Research draft, second pass
A second pass drafted this model: the structure a model of this thing needs, and what is known about it in the world. The line under this one says how the second half was obtained - researched against sources, or recalled without web access, in which case nothing here was read anywhere and every claim is a lead to verify. Unreviewed either way.
recalled by Codex without web access - no source was read
Researched by: Codex
Purpose and description
Enable an agent to recognise a wig, assess its suitability and condition, and determine appropriate fitting, styling, care and reuse actions.
A wig is a wearable covering of human hair, animal hair, synthetic fibres, or a mixture of these, attached to a supporting base and worn over the scalp to replace or alter the appearance of natural hair.
It can be Classify an article as a wig and flag uncertain boundaries with toppers, toupees and other hairpieces.; Compare cap dimensions, coverage and retention with a wearer's stated fitting requirements.; Assess whether a requested cut, parting change, heat treatment or colouring process is supported.; Inspect hair and foundation condition and select cleaning, detangling or repair actions.; Fit, adjust and remove the wig using its documented retention method.; Prepare the wig for storage or reassignment using applicable care and hygiene requirements..
Distinguishing features
Forms a hair-bearing covering intended to be worn over the head, rather than adding individual strands or wefts to existing hair.
Has a foundation or connected supporting construction that positions the hair as a wearable article; loose hair bundles alone do not qualify.
Primarily presents an arrangement of hair or hair-like fibres, distinguishing it from a bare wig cap, hat or headscarf.
Is intended for removal as an article, distinguishing it from transplanted hair or naturally growing hair.
Generally provides broader head coverage than a localised topper or toupee; ambiguous partial-coverage products need an explicit boundary decision.
Scope
+ Full-head hair coverings made with human hair, synthetic fibres or blends
+ Caps, foundations, hairlines, partings and hair attachment construction
+ Sizing, scalp coverage, retention and interfaces with the wearer
+ Appearance, styling capabilities and material-dependent treatment limits
+ Condition, cleaning, storage, repair and readiness for wear
- Hair extensions attached to existing hair and localised hairpieces whose boundary with wigs requires clarification
- The wearer's natural hair, scalp conditions and medical diagnosis
- Standalone adhesives, tapes, wig caps and fitting tools as independently modelled products
- Hairdressing, wigmaking and clinical fitting as services or occupations
- Costumes, religious practices and institutional dress rules beyond requirements they place on a wig
Characteristics
- Hair material
- Human hair; synthetic fibre with identified type where known; blend; other; unknown Constrains cleaning, heat styling, colouring and interpretation of appearance changes.
- Foundation construction
- Recorded combination of wefted, lace, monofilament, skin-like or other construction, including location Explains hair movement, visible scalp effects, ventilation and potential repair methods.
- Coverage
- Full-head; partial or boundary case; coverage areas described Supports classification and checks whether the article covers the intended area.
- Cap dimensions
- Circumference, front-to-nape and ear-to-ear dimensions in cm, with measurement route and stretch condition Makes fit assessment more reliable than a size label alone.
- Mass
- g, specifying dry condition and included accessories Helps assess wearing burden and compare articles of similar coverage.
- Hair length
- cm by region, specifying whether fibres are measured stretched or in their styled form Supports appearance matching, trimming decisions and comparisons across curl patterns.
- Appearance configuration
- Colour distribution, curl pattern, density description, hairline and parting arrangement Records the visible result and whether the wig can meet the intended presentation.
- Retention interface
- Adjustable straps; elastic; clips or combs; grip interface; adhesive interface; combination; other Determines fitting requirements and which wearer or accessory interfaces must be checked.
- Treatment limits
- Link to article-specific care instructions identifying permitted products, processes and any temperature limits in °C Prevents assumptions about heat or chemical tolerance based only on appearance or broad material labels.
- Wear readiness
- Ready; cleaning required; drying required; fitting required; repair required; assessment required; retired Connects observed condition to the next appropriate action.
Also called
Where this came from
wikidata · CC0 1.0
Also registered as vr.tr.wig
Drafted structure
Bundle to layer to finding to question, as the second pass will find it: 6 bundles · 11 layers · 18 findings · 28 questions.
Wig identity and coverage Establishes which hair-bearing article is being described and where its coverage places it within the registry boundary.
Wig labels can overlap with partial hairpieces, while product descriptions can obscure the distinction between a design and an individual article.
Article boundary
Identifies the assembled wearable covering and distinguishes adjacent hair products.
Hair-bearing covering
Determine whether the article functions as a removable head covering with supported hair, and flag partial-coverage cases.
- What supporting construction makes this a wearable hair covering rather than loose hair or extensions? definition
- Does its intended coverage place it within wigs or at the boundary with a topper or toupee? boundary
Design and article evidence
Separates advertised configuration from the observed wig and its alterations.
Configuration traceability
Record which specifications apply to the design and which remain true of this article after customisation or use.
- Which label, maker record or inspection establishes this wig's material and foundation configuration? provenance
- Has cutting, colouring, lace trimming or foundation alteration changed the supplied configuration? provenance
Hair and foundation Describes the fibres and supporting construction that determine the wig's behaviour.
Similar-looking wigs can require different treatments and repairs because their fibres and foundations differ.
Hair composition
Establishes known hair materials without treating marketing terms as verified composition.
Material and treatment history
Identify fibre composition and known processing relevant to subsequent styling and care.
- What evidence identifies human hair, synthetic fibre or a blend, and is composition known across all regions? provenance
- Which previous colouring, bleaching, coating or heat treatments are documented? provenance
Foundation and hair anchoring
Locates foundation materials and the methods by which hair is held.
Construction map
Describe construction by region rather than assuming one label characterises the whole cap.
- Where are lace, monofilament, wefts or other foundation structures present? definition
- How is hair anchored in each region, and which seams, knots or attachment areas require inspection before repair? action
Fit and retention Connects cap geometry and attachment methods to stable, tolerable wear.
A wig's usability depends on its interface with the head and any existing hair, not merely its nominal size.
Cap fit
Assesses dimensions, adjustment range and observed contact during fitting.
Fit and coverage check
Compare measured geometry with fitting requirements and observe gaps, displacement or concentrated pressure.
- What are the cap dimensions and adjustment range under a stated measurement method? measurement
- During a fitting check, does the wig cover the intended areas without unwanted shifting, gaps or pressure? measurement
Attachment and removal
Identifies retention components and their required contact surfaces.
Retention compatibility
Determine how the wig is secured and what must be established before attachment or removal.
- Which retention elements engage existing hair, a separate cap, bare skin or another accessory? definition
- What documented fitting and removal procedure applies to these elements and any selected adhesive system? action
Appearance and styling Records the intended visible result and the transformations the wig can support.
Hairline construction, parting freedom and treatment tolerance constrain whether a requested appearance is achievable.
Visible hair arrangement
Describes colour, length, texture, density and the presentation of the foundation.
Appearance match
Assess the wig against an explicit appearance target using repeatable observations where possible.
- What colour distribution, regional lengths, curl pattern and density description characterise the current wig? measurement
- Which hairline and parting positions does its construction support without exposing unintended foundation areas? boundary
Permitted transformations
Establishes evidence for styling actions before irreversible changes are made.
Styling treatment decision
Evaluate cutting, heat styling and chemical treatment against article-specific instructions and known history.
- What instructions establish permitted styling processes and any limits on temperature, exposure time or products? provenance
- Can the requested style be achieved through reversible arrangement, or does it require cutting or another irreversible treatment? action
Condition, care and service life Assesses deterioration and determines suitable cleaning, repair, storage and reuse actions.
Hair shedding, tangling and foundation damage affect a wig differently and require different responses.
Hair and cap condition
Distinguishes fibre problems from structural or retention failures.
Damage and repairability
Locate deterioration and assess whether intervention can preserve coverage, appearance and fit.
- Where are tangling, matting, shedding, fibre deformation, lace tears, loose wefts or stretched retention elements observed? measurement
- Which defects are repairable under the available construction-specific guidance, and which require specialist assessment or retirement? action
Cleaning, storage and reuse
Connects care procedures and handling history to readiness for the next use.
Care and readiness
Choose documented care methods and establish whether the wig is ready to wear, store or transfer.
- Which cleaning, detangling, drying and support methods are specified for this combination of hair and foundation? action
- What inspection and applicable hygiene requirements must be satisfied before the wig is worn again or reassigned? action
Evidence and external alignment What the world already says about this thing, gathered so the model can be checked against it.
A model that cannot be lined up against existing standards, identifiers and practice cannot be adopted by anyone who already uses them.
Reported evidence
Findings from the breadth pass, kept separate from the structural claims.
Check these first
Recalled without web access and unsourced; every item is a lead to verify.
- The listed kinds overlap: fibre material and base construction are independent classification dimensions.
- The circumference range is an approximate adult fitting range, not a standard; manufacturer measurements should be checked.
- No wig-specific standard is asserted here; applicable product-safety, labelling, and flammability requirements need jurisdiction-specific verification.
- Which of these check these first hold for the sense of wig this model covers, and on what evidence? provenance
Kinds and varieties
Recalled without web access and unsourced; every item is a lead to verify.
- Human-hair wigs
- Synthetic-fibre wigs
- Lace-front wigs
- Full-lace wigs
- Monofilament wigs
- Machine-wefted wigs
- Which of these kinds and varieties hold for the sense of wig this model covers, and on what evidence? provenance
Identifiers and schemes
Recalled without web access and unsourced; every item is a lead to verify.
- Harmonized System (HS), World Customs Organization - 6704 - This heading includes wigs, related hair articles, and articles of human hair; it does not identify wigs exclusively.
- Which of these identifiers and schemes hold for the sense of wig this model covers, and on what evidence? provenance
Real-world use
Recalled without web access and unsourced; every item is a lead to verify.
- Covering hair loss.
- Changing hairstyle, colour, or hair length without altering the wearer's natural hair.
- Creating characters for theatre, film, television, and costume.
- Religious hair covering in some Orthodox Jewish communities.
- Ceremonial dress in some legal professions.
- Which of these real-world use hold for the sense of wig this model covers, and on what evidence? provenance
Typical measurements
Recalled without web access and unsourced; every item is a lead to verify.
- Adult head circumference used for cap sizing - Approximately 52-60 - cm
- Which of these typical measurements hold for the sense of wig this model covers, and on what evidence? provenance
Failure modes and hazards
Recalled without web access and unsourced; every item is a lead to verify.
- Tangling, matting, or fibre shedding can degrade appearance and service life.
- Lace tearing, seam failure, or stretched caps can impair fit and attachment.
- Excessive heat can deform synthetic fibres; exposure to flame can burn or melt wig materials.
- Adhesives, tapes, dyes, or base materials can irritate skin or cause allergic contact reactions.
- Poor fit or failed attachment can cause slippage; tight clips or attachment to natural hair can exert damaging traction.
- Which of these failure modes and hazards hold for the sense of wig this model covers, and on what evidence? provenance
Regional variation
Recalled without web access and unsourced; every item is a lead to verify.
- Court-wig use varies by jurisdiction, court, and professional role.
- Religious acceptance and customary styles of wigs vary among Orthodox Jewish communities.
- Cap-size labels and sizing conventions vary between markets and manufacturers.
- Which of these regional variation hold for the sense of wig this model covers, and on what evidence? provenance
Neighbouring kinds and how to tell them apart
Recalled without web access and unsourced; every item is a lead to verify.
- Hairpiece - Usually supplements or covers a particular area; a wig generally provides a complete hairstyle over most or all of the scalp, although terminology overlaps.
- Toupee - A partial hairpiece typically covering a balding area rather than the whole scalp.
- Hair extensions - Add length or volume through strands or wefts attached to existing hair or near the scalp rather than through a complete wig base.
- Hair transplant - Relocates living hair follicles surgically; a wig is an externally worn manufactured object.
- Which of these neighbouring kinds and how to tell them apart hold for the sense of wig this model covers, and on what evidence? provenance
What the second pass must settle
- Where should this registry draw the boundary between wigs, partial wigs, toppers and toupees, and does an existing world model already own any of that scope?
- Which authoritative terminology and measurement methods should govern cap construction, sizing and hair density, given variation in supplier labels?
- What evidence is sufficient to establish fibre composition and treatment tolerance when labels and care instructions are missing?
- Which product safety, labelling or flammability requirements apply in the intended jurisdiction and use context, including costume and clinical supply contexts?
- What validated care and acceptance criteria support shared use or reassignment without damaging the particular hair and foundation materials?