remote control
Enable an agent to recognise a remote control, assess its readiness and compatibility, and determine which commands it can appropriately send to a separate device.
Research draft, second pass
A second pass drafted this model: the structure a model of this thing needs, and what is known about it in the world. The line under this one says how the second half was obtained - researched against sources, or recalled without web access, in which case nothing here was read anywhere and every claim is a lead to verify. Unreviewed either way.
recalled by Codex without web access - no source was read
Researched by: Codex
Purpose and description
Enable an agent to recognise a remote control, assess its readiness and compatibility, and determine which commands it can appropriately send to a separate device.
A remote control is a physical input device that sends commands over a wired or wireless link to operate separate equipment from a distance.
It can be Identify candidate targets and verify command compatibility using documentation or an authorised low-impact test.; Select a target mode, configure a code profile or pair with equipment where supported.; Send an authorised command while accounting for toggle, hold, repeat and macro behaviour.; Assess command delivery using the strongest available feedback and record uncertainty about the resulting target state.; Diagnose power, input, configuration and transmission faults before replacing the controller.; Replace supported consumables, recharge, clean or reset the controller according to its documented procedure..
Distinguishing features
It provides an input-to-command path intended to operate separate equipment, rather than merely displaying received information.
Its intended operation allows the user to remain away from the controlled equipment; a control panel fixed to that equipment does not meet this boundary.
Its commands must be interpretable by a compatible target, so a matching connector, carrier or frequency alone does not establish compatibility.
It has a physical control interface; a phone application alone belongs to a software model, while a multipurpose device running that application needs an explicit boundary decision.
Its defining output is an operational command rather than only identity, proximity or a sensed measurement.
Scope
+ User inputs, command mappings and target-selection modes
+ Command transmission, addressing, pairing and compatibility
+ Controller power, operating states and command feedback
+ Readiness checks, maintenance and remote-specific failure diagnosis
+ Command authority and safeguards against unintended operation
- The internal operation and overall condition of the controlled equipment
- Software-only remote-control applications and remote desktop services
- The general activity of controlling something remotely
- Passive keys, identification tokens and sensors that do not provide a command interface
- Product-line catalogues and histories of individual controller units
Characteristics
- Controlled target
- Compatible equipment kinds, target models or configured target instances Determines what equipment the controller is intended and configured to operate.
- Transmission medium
- Infrared, radio, wired link, other documented medium, or unknown Determines whether orientation, obstructions, interference or cable continuity can prevent command delivery.
- Command protocol and code profile
- Documented protocol, code set, learned profile or unknown Separates physical signal compatibility from actual command compatibility.
- Target-selection state
- Selected device mode, active address or group, unconfigured, or unknown The same input may operate different equipment depending on the selected target.
- Association state
- Not required, unpaired, pairing, paired, association lost, or unknown Distinguishes controllers that require an association from those that transmit without pairing.
- Input-to-command mapping
- Input and gesture mapped to command, target and mode Makes short presses, holds, repeated presses and macros distinguishable.
- Effective operating distance
- Metres, with target, orientation, obstructions and test conditions recorded Supports a practical delivery assessment without treating nominal range as a guarantee.
- Power supply
- Replaceable cell specification and count, rechargeable supply, external supply, energy harvesting, or other documented source Determines replenishment, charging and replacement requirements.
- Power readiness
- Ready, low-power indication, depleted, charging, supply fault, or unknown Helps distinguish power loss from communication and configuration faults.
- Feedback capability
- No feedback, local input indication, transmission indication, target acknowledgement, reported target state; multiple values allowed Prevents a local light or display from being mistaken for proof that the target acted.
- Command authority
- Permitted operator, target and command set, with restrictions or unknown status Technical ability to transmit does not by itself establish permission to operate equipment.
Also called
Where this came from
wikidata · CC0 1.0
Drafted structure
Bundle to layer to finding to question, as the second pass will find it: 5 bundles · 9 layers · 18 findings · 28 questions.
Target and command compatibility Establishes which equipment the remote can control and how its inputs acquire meaning.
A remote may appear functional while sending commands that the intended target cannot interpret.
Target coverage
Separates claimed support from verified compatibility and current target selection.
Supported targets
Record the equipment families or models supported and the evidence for that support, including any function limitations.
- Which equipment models or receiver systems are documented as compatible, and by which source? provenance
- Does compatibility cover all intended functions or only a subset such as power and volume? boundary
Input semantics
Describes how controls, modes and gestures determine transmitted commands.
Mode-dependent command map
Record button or other input meanings, selected target modes, learned commands and macros where present.
- What command and target correspond to each relevant input in the currently selected mode? definition
- How do a short press, a held input and repeated presses differ, and can one input initiate a sequence? action
Signal path and association Describes how a command reaches its receiver and how the intended receiver is distinguished.
Transmission conditions and association failures require different remedies from incorrect command mappings.
Physical command path
Records the transmission medium and the conditions under which signals reach the target.
Delivery conditions
Assess distance, orientation, obstructions, interference and any intermediary receiver or bridge relevant to command delivery.
- Which medium carries commands, and does this implementation require aiming, a clear path, a cable or an intermediary? definition
- At what distance and under what orientation and obstruction conditions has reliable operation been observed? measurement
Receiver selection
Separates pairing, addressing and shared code reception.
Association and addressing
Record whether the remote requires pairing, uses a configured address or sends codes that multiple receivers may accept.
- How is the intended receiver selected, and can other nearby receivers accept the same command? definition
- What documented steps establish, verify or remove the association without disrupting other controllers? action
Readiness, feedback and recovery Determines whether the remote can operate and what evidence supports a diagnosis when it does not.
An unresponsive target can reflect depleted power, damaged inputs, lost configuration or a failed signal path.
Power and input condition
Assesses the supply and physical controls needed to generate commands.
Controller readiness
Record power requirements, supply condition, stuck or unresponsive controls and damage affecting command generation.
- What power source is specified, and what observable evidence indicates adequate power? provenance
- Do any controls fail to register, remain engaged or produce intermittent or repeated commands? measurement
Feedback and fault isolation
Distinguishes local activity from delivery and execution, then guides recovery.
Evidence of command success
Record separately evidence of input registration, transmission, target acknowledgement and actual target behaviour.
- Does each light, sound or display report local activity, receiver acknowledgement or an observed target state? definition
- Which authorised low-impact test can distinguish a remote fault from a receiver or target fault? action
Configuration-preserving recovery
Identify supported maintenance and recovery actions together with any effect on pairing, learned commands or macros.
- Which documented battery replacement, charging, cleaning or reset procedure applies to this controller? provenance
- Will the proposed recovery action erase target profiles, learned commands or associations, and how can they be restored? action
Controlled action and safeguards Connects command meaning, operator authority and available safeguards to decisions about use.
A command can affect unseen equipment, repeat unexpectedly or reverse a state when the remote lacks reliable feedback.
Command consequences
Characterises commands whose outcome depends on target state or input duration.
State-dependent operation
Distinguish explicit set commands from toggles, continuous commands and sequences whose effect depends on prior state.
- Does the relevant command set a known state, toggle an unknown state, continue while held or initiate a sequence? definition
- What target-state evidence is needed before issuing or retrying this command? action
Authority and unintended activation
Records use restrictions and safeguards present in the controller-target arrangement.
Permitted and protected use
Record authorised commands and any documented lock, enable control, confirmation or target-side interlock without assuming such features exist.
- Who may operate the selected target, and which commands or circumstances are restricted? boundary
- What prevents accidental activation, and is that protection implemented by the remote, receiver or controlled equipment? boundary
- How can the controller be placed in a documented inactive or locked condition when unintended transmission would matter? action
Evidence and external alignment What the world already says about this thing, gathered so the model can be checked against it.
A model that cannot be lined up against existing standards, identifiers and practice cannot be adopted by anyone who already uses them.
Reported evidence
Findings from the breadth pass, kept separate from the structural claims.
Check these first
Recalled without web access and unsourced; every item is a lead to verify.
- The physical controller sense is inferred from PHY.OBJ; the name can also denote the activity or an entire system.
- The numerical examples describe common consumer infrared remotes, not wired, radio or industrial varieties generally.
- Recalled standards and identifier schemes were not checked against sources; product-specific applicability and current editions require verification.
- Which of these check these first hold for the sense of remote control this model covers, and on what evidence? provenance
Kinds and varieties
Recalled without web access and unsourced; every item is a lead to verify.
- Infrared remote control
- Radio-frequency remote control
- Wired remote control
- Universal remote control
- Learning remote control
- Industrial remote-control pendant
- Which of these kinds and varieties hold for the sense of remote control this model covers, and on what evidence? provenance
Identifiers and schemes
Recalled without web access and unsourced; every item is a lead to verify.
- Manufacturer model number - Manufacturer-specific alphanumeric code - Identifies a product model; compatibility also depends on the controlled equipment and command protocol.
- FCC ID - Grantee code followed by a product code - Found on applicable US radio equipment or its radio module; not a universal identifier for remote controls.
- Which of these identifiers and schemes hold for the sense of remote control this model covers, and on what evidence? provenance
Standards and regulation
Recalled without web access and unsourced; every item is a lead to verify.
- Bluetooth Core Specification - Bluetooth Special Interest Group; relevant to remote controls using Bluetooth.
- IEEE 802.15.4 - IEEE; relevant to remote controls using this low-rate wireless communication technology.
- Which of these standards and regulation hold for the sense of remote control this model covers, and on what evidence? provenance
Real-world use
Recalled without web access and unsourced; every item is a lead to verify.
- Operating televisions, audio equipment and media players
- Adjusting air conditioners, fans and lighting
- Opening garage doors and operating gates
- Controlling toys and model vehicles
- Operating industrial machinery from a separate control position
- Which of these real-world use hold for the sense of remote control this model covers, and on what evidence? provenance
Typical measurements
Recalled without web access and unsourced; every item is a lead to verify.
- Indoor operating distance of common consumer infrared remotes - Approximately 5-10 under unobstructed conditions - m
- Infrared emitter wavelength - Commonly around 940 - nm
- Which of these typical measurements hold for the sense of remote control this model covers, and on what evidence? provenance
Failure modes and hazards
Recalled without web access and unsourced; every item is a lead to verify.
- Depleted batteries, leaking cells or corroded contacts interrupt operation.
- Worn, contaminated or stuck buttons cause missed or repeated commands.
- Obstructions, misalignment or strong ambient light interfere with infrared reception.
- Radio interference, lost pairing or incompatible command codes prevent reliable control.
- Unintended commands or loss of communication can create hazards when controlling moving equipment.
- Which of these failure modes and hazards hold for the sense of remote control this model covers, and on what evidence? provenance
Regional variation
Recalled without web access and unsourced; every item is a lead to verify.
- Permitted radio frequencies, transmitter power and equipment approval requirements vary by jurisdiction.
- Regional versions of controlled equipment may require different remote-control codes or product models.
- Which of these regional variation hold for the sense of remote control this model covers, and on what evidence? provenance
Neighbouring kinds and how to tell them apart
Recalled without web access and unsourced; every item is a lead to verify.
- Remote control system - The system includes the command device, communication link, receiver and control integration; this entry covers the physical command device.
- Control panel - A control panel groups operating controls and may be mounted directly on equipment; a remote control operates separate equipment over a link.
- Remote-control application - An application provides remote-control functionality in software on a general-purpose device rather than constituting the physical device kind described here.
- Telemetry device - Telemetry primarily sends measurements or status from equipment, whereas a remote control primarily sends operating commands to it.
- Which of these neighbouring kinds and how to tell them apart hold for the sense of remote control this model covers, and on what evidence? provenance
What the second pass must settle
- Does the registry intend to include tethered pendants, industrial radio controllers and vehicle key fobs, or primarily consumer equipment remotes?
- How should multipurpose physical devices acting as remotes be related to this kind without duplicating their primary device models?
- Which primary documentation establishes representative protocol families, compatibility limits and measured operating ranges for the intended scope?
- Which standards, issuing bodies and certification requirements apply to each included transmission technology, jurisdiction and controlled-equipment class?
- For controllers without target acknowledgement, what evidence threshold should an agent require before retrying a toggle, macro or potentially consequential command?