GAF Nomad
Enable an agent to identify the GAF Nomad aircraft family, distinguish its configurations, and determine what evidence is needed to assess an aircraft's condition and permitted use.
Bundle → Layer → Finding → Questions Filled
6 bundles · 11 layers · 18 findings · 28 questions
Nomad identity and variants Establish the family boundary and the precise configuration to which evidence applies.
Family membership
Connect registry identity to documented aircraft type identity.
Documented Nomad identity
Require corroborating type and manufacturer evidence before assigning an aircraft to this entry.
- Which manufacturer plate, type document or military equivalent establishes this aircraft as a GAF Nomad? provenance
- Does the supplied name identify the aircraft family, a model, a mission configuration or one aircraft? boundary
Variant applicability
Keep N22 and N24 series distinctions attached to configuration evidence.
Model and modification baseline
Establish the exact model and incorporated changes before transferring any specification between Nomads.
- What exact model designation and serial-number range govern this configuration? definition
- Which documented differences in fuselage, loading or systems prevent using another Nomad variant's data? boundary
Propulsion and aircraft controls Represent the installed twin-turboprop system and its interfaces with Nomad flight and ground operation.
Engine and propeller installations
Identify approved propulsion combinations and their operating evidence.
Propulsion compatibility and limits
Record each installed engine and propeller combination with the applicable controls, consumables and limitations.
- Which engine and propeller models are installed on each side, and what approves that combination on this Nomad? provenance
- Which power, temperature, rotational-speed, fuel and lubricant limits apply to these installations? measurement
Configuration controls and warnings
Capture evidence for flap, trim, landing-gear and propeller-control states.
Commanded and confirmed states
Separate selected positions from confirmed mechanical states and functioning warnings.
- What evidence confirms flap, trim and landing-gear state for the installed Nomad control configuration? measurement
- Which approved checks and restrictions apply when a warning, indication or propeller-control function is defective? action
Cabin loading and mission fit Connect Nomad cabin arrangements and mission equipment to usable capacity and loading constraints.
Approved interior and equipment
Identify the installed cabin arrangement and any special-mission changes.
Mission fit approval
Treat role labels as claims that require equipment and installation evidence.
- Which seating, cargo or mission equipment is installed, and which approved drawings or supplements define it? provenance
- Does a Searchmaster or other role designation describe this configuration, and what capability does the installed equipment actually provide? definition
Payload and balance
Represent loading limits using the actual variant and installed configuration.
Admissible load distribution
Combine empty mass, equipment, occupants, cargo and fuel in the approved loading system.
- What current empty mass, loading stations, compartment limits and centre-of-gravity envelope apply? measurement
- Can the proposed passenger, cargo and fuel distribution remain within limits throughout the intended flight? action
Field performance and flight envelope Translate the Nomad's utility-aircraft role into condition-specific performance and operating evidence.
Takeoff and landing evidence
Qualify field-performance values by aircraft configuration and operating conditions.
Runway suitability
Require the applicable manual's distance definitions and corrections when assessing a runway.
- Which approved charts give takeoff and landing distances for this Nomad variant, mass and flap setting? provenance
- How do elevation, temperature, wind, slope, surface and obstacle assumptions affect the required distances? measurement
Normal and degraded envelope
Connect speed, weather and engine-out constraints to the documented installation.
Configuration-dependent flight limits
Preserve the distinction between published performance, operating limitations and capability under a failure condition.
- Which speed, flap, landing-gear and weather limitations apply after all relevant supplements and restrictions are considered? provenance
- What approved engine-out data supports the intended mass, altitude and temperature, and what remains unsubstantiated? measurement
Nomad continuing airworthiness Organize Nomad-specific structural, control-system and compliance evidence.
Structural and control integrity
Track inspection evidence for Nomad structural and flight-control areas identified by applicable instructions.
Inspection and repair evidence
Record findings, repairs and remaining obligations without inferring serviceability from an aircraft's appearance.
- Which stabiliser, aileron, wing-strut and associated control inspections apply to this serial number and modification state? provenance
- What dated inspection results, approved repairs and next-due thresholds establish the condition of those areas? measurement
Requirements and release
Resolve regulatory requirements, service information and maintenance-release evidence separately.
Applicable obligations and disposition
Determine the significance of each requirement using jurisdiction, revision, aircraft configuration and authorized sign-off.
- Which current airworthiness directives, life limits and mandatory maintenance requirements apply, and which service bulletins are advisory or incorporated by an obligation? provenance
- Which unresolved defect, overdue task or missing record requires maintenance referral or prevents an authorized release? action
Evidence and external alignment What the world already says about this thing, gathered so the model can be checked against it.
Reported evidence
Findings from the breadth pass, kept separate from the structural claims.
Check these first
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these check these first hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Kinds and varieties
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these kinds and varieties hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Identifiers and schemes
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these identifiers and schemes hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Real-world use
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these real-world use hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Typical measurements
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these typical measurements hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Failure modes and hazards
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these failure modes and hazards hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Regional variation
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these regional variation hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Neighbouring kinds and how to tell them apart
Recalled without web access and unsourced; every item is a lead to verify.
- Which of these neighbouring kinds and how to tell them apart hold for the sense of GAF Nomad this model covers, and on what evidence? provenance
Classifiers Filled
- Family
- Thing Registry
- Category
- Physical world and living systems
- Entry kind
- thing
- Plane
- PHY
- Domain
- PHY.OBJ
- Other names and narrower kinds
- N2 Nomad, GAF N22 Nomad, GAF N24 Nomad, GA18 Nomad, N24A Nomad, N24B Nomad
What it is Filled
The GAF Nomad is an Australian family of twin-turboprop, high-wing utility aircraft with short take-off and landing capability, developed by Government Aircraft Factories for civil and military transport.
In scope
- Nomad family identity and distinctions between N22 and N24 series configurations
- Variant-specific airframe, engine, propeller and landing-gear configurations
- Approved loading, cabin arrangements and mission installations
- Configuration-dependent flight limitations and runway performance
- Nomad-specific inspection, modification and airworthiness applicability
Out of scope
- General aircraft principles shared with the parent aircraft model
- Standalone models of engines, propellers and avionics
- Individual aircraft ownership histories and flight logs
- Airline operations, crew licensing and airport management
- Manufacturer corporate history and proposed successor aircraft
Why it exists Filled
Enable an agent to identify the GAF Nomad aircraft family, distinguish its configurations, and determine what evidence is needed to assess an aircraft's condition and permitted use.
Distinguishing features Filled
- Require a documented GAF Nomad type and model identity; the word Nomad alone does not establish membership.
- Resolve the precise designation rather than treating N22 and N24 series as interchangeable; CASA certificate 73-1 lists multiple approved models. [CASA type certificate](https://www.casa.gov.au/sites/default/files/2021-10/type-certificate-73-1.pdf)
- Use the combination of high wing, twin turboprop propulsion and retractable wheeled landing gear as a preliminary recognition test, then verify identity against aircraft records.
- Distinguish mission names and installed equipment from the underlying certificated model.
- Treat an individual registration or serial number as an instance identifier, not a separate Nomad family.
What robots and AI may and may not do Filled
Must not
- Recommend flight or loading without current airworthiness and maintenance records.
- Override weight, balance or performance limits stated in the flight manual.
- Present historical accident data as the status of a specific airframe.
Only with a human decision
- Decisions to fly, load or return an aircraft to service.
- Changes to the aircraft's configuration or role.
May
- Identify a Nomad aircraft and its variant from registration and documentation.
- Report airworthiness status and history from official records.
Moral aspects Filled
- Utility aircraft serve remote communities and medical flights that depend on safe operation.
- The type has a history of accidents, so accurate records protect crews and passengers.
Who is affected
- Crews and passengers
- Remote communities served
- People on the ground
Owners Filled
Steward
The registered owner or operator; the civil aviation authority holds the register.
Master systems
- National civil aircraft registers
Links to other meta-models Filled
parent
- Q19309626 - registry parent class
- Q68072093 - registry parent class
What else AI and robots need to interact with it Filled
Identity and identifiers required Filled
- Vercy registry: vr.tr.gaf-nomad
- Wikidata: Q205628 (https://www.wikidata.org/wiki/Q205628)
Direct properties required Filled
- Certificated model: Exact designation from applicable type documentation
- Aircraft-to-type identity: Manufacturer plate and serial number linked to model and approval records
- Installed propulsion configuration: Left and right engine, propeller and control-system models with modification status
- Airframe dimensions: Length, wingspan and height in m, qualified by variant and configuration
- Mass and centre-of-gravity envelope: kg and centre-of-gravity position in the approved datum system
- Approved cabin arrangement: Documented seating, cargo or special-mission arrangement
- Takeoff and landing requirement: m, with mass, elevation, temperature, wind, surface and configuration
- Flight-control and landing-gear condition: Verified serviceable, restricted, defective or unknown, with dated evidence
- Continuing-airworthiness status: Applicable requirements satisfied, overdue, unresolved or unknown
Recognition required Filled
- Twin turboprop engines mounted on a high, braced wing.
- A boxy fuselage with a square rear cargo door and fixed tricycle landing gear.
- A longer fuselage distinguishes the stretched variant from the short one.
Capabilities and actions required Filled
- Resolve a reported Nomad identity to its documented model and configuration.
- Retrieve applicable flight manuals, supplements and maintenance instructions.
- Compare a proposed cabin or mission installation with approved configurations.
- Evaluate proposed loading and runway use against configuration-specific approved data.
- Identify missing inspection evidence or unresolved defects for qualified review.
- Trace a proposed replacement component or modification to its installation approval.
Hazards and failure modes required Filled
- Operating outside weight and balance limits degrades handling.
- Structural or control issues on ageing airframes require strict inspection.
Standards and interfaces required Filled
- Annex 8 to the Convention on International Civil Aviation, Airworthiness of Aircraft, International Civil Aviation Organization.
Context of use required Filled
- This aircraft family was developed for short-distance passenger and cargo transport, including operations serving remote communities and locations with short runways.
- Civil and military examples have also served utility roles such as patrol, medical evacuation and liaison, depending on their equipment and approved configuration.
Sources Filled
- Wikidata item Q205628: GAF Nomad - identity and sense of the item
- Wikipedia: GAF Nomad - general description of the item
Open questions
- What exact certification basis, approved dimensions, masses and engine-propeller combinations apply to each Nomad model?
- How do civil model designations, military designations and mission names map to one another without implying equivalent equipment or approvals?
- Which current directives and structural life or inspection limits apply across serial numbers and modification states?
- Which approved flight manuals and supplements establish short-field, engine-out and weather capabilities for each configuration?
- What documented boundary separates original Nomads, approved conversions and proposed successor designs such as the GA18?
Machine files
Provenance
thing registry research (pass 2) · unreviewed
Built from: models/things/publications/thing-q205628/spec.json