{ "vercy": "1.0-draft", "publication": { "status": "research-draft", "adjudicationStatus": "unreviewed", "publishableCanonical": false, "generatedAt": "2026-09-12T11:41:13Z", "providers": [ "Codex" ], "breadth": "recalled by Codex without web access - no source was read", "missingProviders": [], "pass": 2, "cost": { "grok": { "seconds": 23.2, "error": "Reading additional input from stdin...\nOpenAI Codex v0.153.4\n--------\nworkdir: R:\\02_PROJECTS\\02_Meta_Models_Platforms\\Ver.cy\\current\\thing-registry-backlog\nmodel: gpt-6-astra\nprovider: openai\napproval: never\nsandbox: read-only\nreasoning effort: none\nreasoning summaries: none\nsession id: 01a0956a-ef59-7482-b4bf-4f918d42beb6\n--------\nuser\nDescribe what is already known about one registered thing. Answer as JSON only, no prose around it.\n\nThing: nose cone\nSense to describe: (none recorded)\nDomain code: PHY.OBJ\nAlso known as: (none)\n\n\nContext for this batch of 1001 things:\n# Batch 044: 1001 regis", "usd": 0.0, "recall": true }, "codex": { "seconds": 65.4, "error": "Reading additional input from stdin...\nOpenAI Codex v0.153.4\n--------\nworkdir: R:\\02_PROJECTS\\02_Meta_Models_Platforms\\Ver.cy\\current\\thing-registry-backlog\nmodel: gpt-6-astra\nprovider: openai\napproval: never\nsandbox: read-only\nreasoning effort: none\nreasoning summaries: none\nsession id: 01a0956a-ef51-71b3-a650-3df4269b519f\n--------\nuser\nYou are drafting a Vercy meta-model for one registered thing. Answer as JSON only, no prose around it.\n\nThing: nose cone\nRegistry id: vr.tr.nose-cone\nPlane / domain: PHY / PHY.OBJ\nRegistry definition: (none recorded)\nNames folded into this entry: (none)\n\n\nCont" } }, "enrichment": { "pass": 3, "engine": "claude", "producedAt": "2026-10-06T12:00:00Z", "ingestedAt": "2026-10-06T08:53:14+00:00", "fields": [ "agent_conduct", "ethics", "failure_modes_and_hazards", "owners", "visual_identification" ] }, "gate": { "passed": true, "version": "1.0", "at": "2026-10-07T10:10:29+00:00", "evidence": [ "completeness 1.00", "sense: Wikidata description", "2 live sources", "review by codex: pass" ] } }, "metaModel": { "id": "THING-Q2713784", "registryId": "vr.tr.nose-cone", "name": "nose cone", "version": "0.1.0-research.1", "entryKind": "thing", "family": "Thing Registry", "domain": [ "PHY.OBJ" ], "status": "research-draft" }, "canonicalUrl": "https://ver.cy/models/thing/q2713784/", "model": { "registry_id": "vr.tr.nose-cone", "name": "nose cone", "purpose": "Enable an agent to identify a nose cone, assess its suitability and condition for a specified vehicle, and determine permitted installation, inspection, repair or replacement actions.", "definition": "A nose cone is the shaped forwardmost component of a rocket, missile, aircraft, or similar vehicle, forming its leading external contour to manage airflow and often enclosing or protecting equipment or payload.", "scope_statement": "This model owns the forward external component that forms a vehicle's nose profile, including its geometry, construction, attachments, protective functions and any declared signal-transmission or separation requirements; it distinguishes the registered kind from particular designs and installed units.", "in_scope": [ "Nose profile, tip geometry, base dimensions and external surface condition", "Shell construction, internal reinforcement and thermal protection belonging to the nose cone", "Attachment, alignment and load transfer at the vehicle interface", "Protection and clearance of equipment or payload enclosed by the nose cone", "Conditional functions such as radio-frequency transmission, venting, removal or separation", "Inspection findings and configuration-specific serviceability limits" ], "out_of_scope": [ "Whole-vehicle flight dynamics, propulsion and guidance", "Sensors, antennas, payloads or other equipment enclosed by the nose cone", "Body tubes, fuselage sections and structures behind the defined mounting interface", "Other fairings, inlet lips and rotating propeller spinners unless the registry explicitly includes them", "Recovery systems and separation actuators beyond their interfaces with the nose cone" ], "distinguishing_features": [ "Occupies the vehicle's forward end and forms its nose profile, rather than covering a protrusion elsewhere on the vehicle.", "Has an identifiable physical component boundary or design boundary; a pointed silhouette alone does not establish a separate nose cone.", "Is classified by its forward-position and profile-forming role; a radome is classified by antenna protection and signal transmission, so one component can satisfy both descriptions.", "Does not require a mathematically conical shape; identification follows its role and placement rather than straight-sided geometry.", "Is distinguished from an entire payload fairing by the recorded enclosure and separation boundaries, even where the nose cone forms part of that fairing." ], "characteristics": [ { "name": "Host and mounting interface", "kind": "relation", "unit_or_values": "Vehicle or vehicle-family reference, mating component and interface drawing revision", "why_it_matters": "Establishes where the nose cone belongs and which compatibility requirements apply." }, { "name": "Profile family", "kind": "category", "unit_or_values": "Conical, ogive, elliptical, parabolic, other specified profile or unknown", "why_it_matters": "Identifies the intended contour without treating all nose cones as geometrically conical." }, { "name": "External geometry", "kind": "measurement", "unit_or_values": "Axial length, base diameter or cross-section dimensions, tip radius and contour deviations in mm", "why_it_matters": "Supports envelope, fit and contour conformity checks." }, { "name": "Construction", "kind": "category", "unit_or_values": "Specified material grades, shell architecture, reinforcement and coating or thermal-protection system", "why_it_matters": "Determines which damage mechanisms, inspection methods and repair limits require evaluation." }, { "name": "Mass properties", "kind": "measurement", "unit_or_values": "Mass in kg and centre-of-mass coordinates in mm relative to a declared datum", "why_it_matters": "Allows the host model to evaluate the consequences of installation or replacement." }, { "name": "Qualified operating envelope", "kind": "relation", "unit_or_values": "Requirement or qualification record specifying applicable speed, pressure, temperature, heating and load limits", "why_it_matters": "Prevents suitability from being inferred from geometry or material alone." }, { "name": "Enclosure function", "kind": "category", "unit_or_values": "Empty aerodynamic enclosure, equipment protection, payload protection, antenna enclosure or other declared function", "why_it_matters": "Determines required clearance, environmental protection and transmission checks." }, { "name": "Retention configuration", "kind": "category", "unit_or_values": "Permanently attached, service-removable, mission-separable or unspecified", "why_it_matters": "Separates maintenance removal from intentional release during operation." }, { "name": "Condition and disposition", "kind": "state", "unit_or_values": "Uninspected, acceptable for specified use, restricted, repair required or rejected, with assessment reference", "why_it_matters": "Connects observed damage and configuration conformity to an explicit use decision." } ], "affordances": [ "Compare a candidate nose cone with a host's mounting interface, envelope and qualification requirements.", "Inspect the tip, shell, surface protection and attachment region against applicable acceptance limits.", "Check enclosed-equipment clearance and any specified venting or radio-frequency requirements.", "Install or remove the nose cone using the approved retention and alignment procedure.", "Refer damage or proposed modifications for a configuration-specific repair or replacement decision.", "Verify retention or separation readiness where the design provides those functions." ], "agent_conduct": { "may": [ "Describe the shapes and roles of nose cones in aircraft, rockets and vehicles from public sources.", "Inspect a nose cone or radome for damage on aircraft the agent is authorized to maintain.", "Explain historical and museum examples of nose cones." ], "must_not": [ "Help design, build or improve nose cones or payload sections for weapons.", "Help anyone launch amateur rockets outside the rules of the aviation authority and the site.", "Return a damaged nose cone or radome to service without approved inspection.", "Share controlled technical data on missile components." ], "requires_human": [ "Signing off repairs to a nose cone or radome for flight." ] }, "ethics": { "considerations": [ "Nose cones on missiles carry weapons, so technical help must stay within lawful civilian use.", "Damaged nose cones on aircraft can hide radar faults that affect flight safety." ], "affected_parties": [ "Passengers and crew", "People under flight paths", "Maintenance workers" ] }, "owners": { "steward": "The operator of the vehicle or aircraft it belongs to.", "master_systems": [] }, "visual_identification": [ "The pointed or rounded front section of a rocket, aircraft or high-speed vehicle.", "On aircraft often a painted composite dome housing radar, called a radome." ], "failure_modes_and_hazards": [ "Bird strikes and hail can crack or deform aircraft nose cones.", "Separation of a nose cone in flight can damage the vehicle and endanger people below." ], "what_it_is_for": [ "Nose cones form the leading contour of aircraft, rockets and other vehicles moving through air.", "They shape aerodynamic loading and may protect instruments, sensors or payloads.", "Inspection and selection depend on the vehicle's operating environment, attachment design and any requirements for signal transmission through the enclosure." ], "standards_and_regulation": [ "Title 14 of the Code of Federal Regulations, Part 25, administered by the United States Federal Aviation Administration, applies to nose cones incorporated into transport category airplanes certificated under that part." ] }, "sources": [ { "id": "wikidata", "title": "Wikidata item Q2713784: nose cone", "url": "https://www.wikidata.org/wiki/Q2713784", "url_status": "live", "what_it_supports": "identity and sense of the item", "checked_by": "wikidata-api" }, { "id": "wikipedia-en", "title": "Wikipedia: Nose cone", "url": "https://en.wikipedia.org/wiki/Nose_cone", "url_status": "live", "what_it_supports": "general description of the item", "checked_by": "wikidata-api sitelink" } ], "structure": { "bundles": [ { "id": "nose-identity-and-contour", "name": "Nose identity and contour", "description": "Establishes the component boundary and the forward profile represented by the model.", "rationale": "Nose cones overlap with radomes and payload fairings, while their shapes need not be cones.", "layers": [ { "id": "component-role-and-boundary", "name": "Component role and boundary", "description": "Locates the nose cone within the host and distinguishes overlapping component roles.", "findings": [ { "id": "forward-profile-component", "name": "Forward profile component", "description": "Record what identifies the component as a nose cone and where its boundary ends.", "questions": [ { "text": "Which host component forms the forward external profile, and where is its aft boundary?", "kind": "boundary", "id": "forward-profile-component-q01" }, { "text": "Does this same component also serve as a radome or part of a payload fairing, and how are those roles linked without duplicating the component?", "kind": "definition", "id": "forward-profile-component-q02" } ] } ] }, { "id": "profile-definition", "name": "Profile definition", "description": "Captures the contour and dimensions needed to recognise a particular design.", "findings": [ { "id": "controlled-nose-geometry", "name": "Controlled nose geometry", "description": "Record the specified profile, tip geometry and base transition using a declared datum.", "questions": [ { "text": "What drawing or mathematical contour defines the profile, tip radius and transition to the adjoining body?", "kind": "provenance", "id": "controlled-nose-geometry-q01" }, { "text": "What are the measured length, base dimensions and contour deviations, with units and tolerances?", "kind": "measurement", "id": "controlled-nose-geometry-q02" } ] } ] } ] }, { "id": "flow-loads-and-thermal-response", "name": "Flow loads and thermal response", "description": "Connects nose geometry and construction to the host's specified operating conditions.", "rationale": "A matching shape does not establish that a nose cone can tolerate the intended flow, pressure or heating.", "layers": [ { "id": "external-flow-envelope", "name": "External flow envelope", "description": "Identifies the operating cases that govern the exposed nose surface.", "findings": [ { "id": "applicable-flow-cases", "name": "Applicable flow cases", "description": "Record the host-specific flow and pressure cases against which suitability must be assessed.", "questions": [ { "text": "Which speed or Mach range, dynamic pressures and incidence conditions define the intended use?", "kind": "measurement", "id": "applicable-flow-cases-q01" }, { "text": "What analysis or test evidence supports this contour and construction for those conditions?", "kind": "provenance", "id": "applicable-flow-cases-q02" } ] } ] }, { "id": "shell-and-tip-response", "name": "Shell and tip response", "description": "Addresses structural and thermal demands at the nose tip, shell and base.", "findings": [ { "id": "construction-dependent-limits", "name": "Construction-dependent limits", "description": "Record the material system and the limits governing deformation, heating and surface loss.", "questions": [ { "text": "What shell thicknesses, reinforcements, material grades and thermal-protection layers are specified at the tip and along the shell?", "kind": "measurement", "id": "construction-dependent-limits-q01" }, { "text": "Which load, temperature, heat-flux or exposure-duration limits apply, and what evidence establishes them?", "kind": "provenance", "id": "construction-dependent-limits-q02" } ] } ] } ] }, { "id": "enclosed-volume-and-functional-surfaces", "name": "Enclosed volume and functional surfaces", "description": "Describes what the nose cone encloses and any special requirements imposed on its shell.", "rationale": "Equipment clearance, cavity pressure and signal transmission can govern suitability independently of external shape.", "layers": [ { "id": "cavity-and-environment", "name": "Cavity and environment", "description": "Defines usable internal space and required exchange or exclusion of air, water and contaminants.", "findings": [ { "id": "protected-volume-requirements", "name": "Protected volume requirements", "description": "Record enclosed items, clearance requirements and the intended pressure and moisture behaviour.", "questions": [ { "text": "What equipment or payload envelope must remain clear of the shell, including permitted shell deflection?", "kind": "boundary", "id": "protected-volume-requirements-q01" }, { "text": "What venting, drainage or sealing requirements apply to the cavity, including allowable pressure differential?", "kind": "measurement", "id": "protected-volume-requirements-q02" } ] } ] }, { "id": "conditional-signal-transmission", "name": "Conditional signal transmission", "description": "Applies additional shell requirements only when equipment must transmit or receive through it.", "findings": [ { "id": "radome-function-applicability", "name": "Radome function applicability", "description": "Establish whether the nose cone has a radio-frequency transmission role and record its acceptance criteria.", "questions": [ { "text": "Must an antenna operate through this nose cone, and which frequency bands and viewing directions are required?", "kind": "definition", "id": "radome-function-applicability-q01" }, { "text": "What transmission-loss and angular-error limits apply, and under which surface and environmental conditions are they verified?", "kind": "measurement", "id": "radome-function-applicability-q02" } ] } ] } ] }, { "id": "attachment-release-and-serviceability", "name": "Attachment, release and serviceability", "description": "Connects installed configuration and physical condition to permitted handling and use.", "rationale": "Nose-cone readiness depends on secure attachment, any intended release function and damage limits specific to its construction.", "layers": [ { "id": "mounting-and-release-interface", "name": "Mounting and release interface", "description": "Defines alignment, retention and conditional separation requirements.", "findings": [ { "id": "retention-and-removal-logic", "name": "Retention and removal logic", "description": "Record how the nose cone is secured and distinguish service removal from mission separation.", "questions": [ { "text": "Which mating surfaces, fasteners, bonds or retainers establish alignment and transfer loads to the host?", "kind": "boundary", "id": "retention-and-removal-logic-q01" }, { "text": "Is removal permitted only for servicing or also during operation, and what procedure and readiness checks govern that action?", "kind": "action", "id": "retention-and-removal-logic-q02" } ] } ] }, { "id": "damage-and-disposition", "name": "Damage and disposition", "description": "Assesses defects in the tip, shell, protective surfaces and attachment region.", "findings": [ { "id": "nose-specific-acceptance", "name": "Nose-specific acceptance", "description": "Tie observed defects to applicable inspection and repair criteria rather than appearance alone.", "questions": [ { "text": "What tip deformation, cracks, dents, erosion, coating loss, attachment damage or construction-specific defects are present, and what are their locations and dimensions?", "kind": "measurement", "id": "nose-specific-acceptance-q01" }, { "text": "Which approved criteria determine continued use, further inspection, repair or replacement, including any required contour or transmission recheck?", "kind": "action", "id": "nose-specific-acceptance-q02" } ] } ] } ] }, { "id": "evidence-and-external-alignment", "name": "Evidence and external alignment", "description": "What the world already says about this thing, gathered so the model can be checked against it.", "rationale": "A model that cannot be lined up against existing standards, identifiers and practice cannot be adopted by anyone who already uses them.", "layers": [ { "id": "reported-evidence", "name": "Reported evidence", "description": "Findings from the breadth pass, kept separate from the structural claims.", "findings": [ { "id": "evidence-confidence-notes", "name": "Check these first", "description": "Recalled without web access and unsourced; every item is a lead to verify.", "evidence": [ "The listed kinds classify external geometry; functional categories such as radomes and separable recovery noses overlap them.", "The boundary between nose cone, complete aircraft nose, and payload fairing varies with engineering context.", "Dimensions, materials, thermal limits, and applicable certification requirements require a specified vehicle and operating regime; none are universal to nose cones." ], "questions": [ { "id": "evidence-confidence-notes-q01", "text": "Which of these check these first hold for the sense of nose cone this model covers, and on what evidence?", "kind": "provenance" } ] }, { "id": "evidence-kinds", "name": "Kinds and varieties", "description": "Recalled without web access and unsourced; every item is a lead to verify.", "evidence": [ "Conical nose cone", "Tangent-ogive nose cone", "Secant-ogive nose cone", "Ellipsoidal nose cone", "Parabolic nose cone", "Haack-series nose cone" ], "questions": [ { "id": "evidence-kinds-q01", "text": "Which of these kinds and varieties hold for the sense of nose cone this model covers, and on what evidence?", "kind": "provenance" } ] }, { "id": "evidence-real-world-use", "name": "Real-world use", "description": "Recalled without web access and unsourced; every item is a lead to verify.", "evidence": [ "Providing the aerodynamic forebody of rockets and missiles", "Enclosing guidance instruments, sensors, or other forward-mounted equipment", "Serving as a radar-transparent enclosure when designed as a radome", "Protecting a launch vehicle's payload during atmospheric ascent as part of a payload fairing", "Separating during some model-rocket recovery sequences to permit parachute deployment" ], "questions": [ { "id": "evidence-real-world-use-q01", "text": "Which of these real-world use hold for the sense of nose cone this model covers, and on what evidence?", "kind": "provenance" } ] }, { "id": "evidence-measurements", "name": "Typical measurements", "description": "Recalled without web access and unsourced; every item is a lead to verify.", "evidence": [ { "quantity": "Fineness ratio, defined as nose length divided by base diameter", "typical_range": "Application-dependent; no single range represents the whole class", "unit": "dimensionless" }, { "quantity": "Tip radius", "typical_range": "Application-dependent, from nearly pointed to deliberately blunt", "unit": "mm or m" } ], "questions": [ { "id": "evidence-measurements-q01", "text": "Which of these typical measurements hold for the sense of nose cone this model covers, and on what evidence?", "kind": "provenance" } ] }, { "id": "evidence-failure-modes-and-hazards", "name": "Failure modes and hazards", "description": "Recalled without web access and unsourced; every item is a lead to verify.", "evidence": [ "Buckling, cracking, or attachment failure under aerodynamic and inertial loads", "Overheating, erosion, or material degradation during high-speed flight", "Impact damage or composite delamination that reduces structural integrity", "Failure of a separable nose cone or fairing to release, obstructing payload or recovery-system deployment", "Radar attenuation or distortion when a nose cone serving as a radome is damaged, wet, contaminated, or made from unsuitable material" ], "questions": [ { "id": "evidence-failure-modes-and-hazards-q01", "text": "Which of these failure modes and hazards hold for the sense of nose cone this model covers, and on what evidence?", "kind": "provenance" } ] }, { "id": "evidence-neighbours", "name": "Neighbouring kinds and how to tell them apart", "description": "Recalled without web access and unsourced; every item is a lead to verify.", "evidence": [ { "name": "Radome", "difference": "A radome is defined by protecting an antenna while permitting electromagnetic transmission; it need not occupy the nose, and a nose cone need not be radar-transparent." }, { "name": "Payload fairing", "difference": "A payload fairing encloses a payload and may include a nose cone plus a substantial cylindrical or tapered enclosure." }, { "name": "Heat shield", "difference": "A heat shield is defined by thermal protection; a nose cone is defined by its forward position and external shape, though one component can perform both functions." }, { "name": "Spinner", "difference": "A spinner is a streamlined cover over a propeller hub, generally rotating with the propeller." }, { "name": "Forebody", "difference": "The forebody is the broader forward region of a vehicle; a nose cone is a component forming its leading portion." } ], "questions": [ { "id": "evidence-neighbours-q01", "text": "Which of these neighbouring kinds and how to tell them apart hold for the sense of nose cone this model covers, and on what evidence?", "kind": "provenance" } ] } ] } ] } ] }, "openQuestions": [ "Does this registry entry cover nose cones across aircraft, rockets and other vehicles, or does its source establish a narrower intended class?", "Which existing Vercy models already cover nose cones, radomes or payload fairings, and where should shared component identity be maintained?", "Which primary references establish useful profile categories and operating-envelope descriptors across the intended vehicle classes?", "Which standards or host-specific specifications govern attachment, structural and thermal qualification, and conditional radio-frequency performance?", "What construction-specific inspection and repair criteria can be supported by published evidence, and which must remain design-authority decisions?" ], "statistics": { "bundles": 5, "layers": 9, "findings": 14, "questions": 22 } }